AliExpress에서 가장 많이 판매되는 목재 시트 6가지
AliExpress에서 가장 많이 팔리는 미완성 목재 시트 세트 6종에 대한 상세하고 직접적인 리뷰를 확인해 보세요. 2025년에 구매할 가치가 있는 공예, 모형 제작, 레이저 조각용 얇은 목재 보드를 확인해 보세요.
 |
공예품을위한 4x4in 빈 나무 사각형 (10pcs)
나는이 4x4 인치 빈 나무 사각형을 특전 적 취미와 홈 데코 DIY를 위해 특별히 구입했습니다. 크기는 코스터, 미니 벽 예술, 심지어 더 비싼 목재에 태우기 전에 패턴을 테스트하는 데 이상적이었습니다. 나를 끌어 들인 것은 깨끗하고 균일 한 모양과 부드러운 마감의 약속이었습니다.
배달은 미국에 약 2 주 반이 걸렸으며, 예상보다 빠릅니다. 나무 사각형은 잘 포장되어 도착했고, 손상되거나 부서지는 사람은 없습니다. 각 조각에는 깨끗한 레이저 컷 가장자리와 일관된 곡물이있었습니다. 나는 나무 연소와 수채화 그림에 사용했습니다. 그들은 얼룩을 흡수하고 고르게 페인트 칠합니다. 이것은 항상 큰 박스 상점에서 저렴한 공예 나무로 얻는 것이 아닙니다.
장점 :
- 작은 공예품을위한 완벽한 크기와 두께
- 부드러운 마감재, 최소한의 샌딩이 필요합니다
- 나무 연소와 그림에 좋습니다
- 미국 공예품 상점에 비해 저렴합니다
단점 :
- 처음에는 약간의 냄새이지만 하루에 방송되었습니다.
- 몇 조각에는 사소한 표면 찌그러짐이있었습니다
Michaels 또는 Joann의 유사한 팩과 비교할 때 10 조각은 쉽게 12 ~ 15 달러의 비용이들 수 있습니다. 가격의 절반 미만으로 도둑질되었습니다. 그리고 네 - 그들은분명히 내 기대를 만났을 수도 있습니다. 나는 이미 내 팩을 사용했고 곧 다시 주문할 것입니다.
US $ 1.66 |
15x10cm 얇은베이스 우드 시트 (10pcs)
스케일 모델 프로젝트 및 사용자 정의 레이블을 위해이 2mm베이스 우드 시트를 선택했습니다. 나는 균일 한 크기와 Basswood가 일반적으로 자르고 페인트하기가 쉽다는 사실에 의해 끌려 갔다. 나에게있어, 2mm의 시트 두께는 달콤한 지점입니다. 너무 얇지 않고 너무 두껍지 않습니다.
배송은 원활했으며 3 주 안에 도착했습니다. 나무는 단단히 수축되어 평평하게 놓여 있었고 뒤틀지 않았습니다. 표면 품질은 우수했습니다 - 나는 자르고 그림을 그리기 전에 간신히 준비해야했습니다. 그들은 또한 공예 나이프로 버터처럼 자르고 파편을 만들지 않았습니다.
장점 :
- Uniform grain and excellent flexibility
- Easy to work with – no splitting or cracking
- Consistent size, no warping
- Surprisingly high quality for the price
Cons:
- You can′t apply heavy pressure; it's still thin
- Slight variation in tone across some pieces
At $5–6 per 10-pack, the price beat anything I′ve seen locally. Similar boards in US hobby stores can run $1.50–$2 each. I used them for laser engraving and the results came out crisp and clean. Definitely a great purchase for any crafter or DIY enthusiast.
US $1.66 |
20x30cm Plywood Craft Panels (8pcs)
These plywood panels instantly caught my attention for their large size and the option to buy up to 48 pieces. I started small with the 8-piece option to test the quality, planning to use them for sign-making and laser engraving.
Delivery was on the longer side – about three weeks – but the package was well-sealed. The 2mm thickness gives these boards a nice balance between flexibility and sturdiness. Each piece had an ultra-smooth surface, which is great for laser etching. I also painted a few panels and they took acrylics very well.
Pros:
- Generous size for a low price
- High-quality laser cuts
- Great for sign-making, painting, and burning
- Zero warping or breakage
Cons:
- Slightly inconsistent wood grain between pieces
- Some faint burn marks on edges from laser cutting
These boards cost me about $0.80 each, whereas in the US, I'd easily pay $2–3 per board for something similar. I was genuinely surprised by the quality – they didn′t just meet expectations, they raised the bar for what I now expect from AliExpress.
US $8.16 |
Balsa Wood Sheets for DIY Projects (5pcs)
I chose these thin balsa wood sheets for making mini gliders and architectural models. The product came with size options, and I picked 300mm-long, 2mm-thick pieces. I was curious to see if they′d hold up like the balsa I used to buy at hobby shops.
They arrived in 18 days, securely packaged. Each sheet was feather-light, as balsa should be, and very easy to cut. I didn′t encounter splinters or soft spots. I glued a couple of pieces together for added thickness, and they bonded beautifully without curling.
Pros:
- Excellent lightness and clean surface
- Very easy to cut and glue
- Great for lightweight structures
Cons:
- Not ideal for wet mediums – warps with paint
- A few thin streaks of discoloration
In the US, balsa like this typically costs $1.50+ per sheet. This five-pack cost less than that total. While not perfect for all media, it′s fantastic for dry construction and decorative projects. It did exactly what I needed it to do.
US $0.99 |
15x10cm Basswood Boards (10pcs)
These thin basswood boards are similar to another pack I bought, but I was specifically looking for consistent rectangular cuts for laser practice. The description and positive reviews convinced me to try this one too.
Shipping took 16 days. The boards came in pristine condition, all pieces tightly stacked and flat. I tested them on my diode laser engraver, and they handled detailed vector art perfectly. There was no edge charring, and contrast came out crisp.
Pros:
- Very smooth, ideal for fine engraving
- Pre-cut to exact measurements
- No prepping needed – ready to use
- Stronger than it looks for a 2mm board
Cons:
- Only suitable for small projects
- Slight price difference compared to similar listings
These cost about $6 for 10 pieces, while U.S. suppliers would charge at least $12. I plan to reorder in a larger size next time. These boards not only met my expectations – they′ve become a new staple in my crafting supply bin.
US $1.66 |
Assorted Thickness Balsa Wood Pack (10pcs)
This set stood out because of the mixed thickness options (from 1mm to 8mm). I needed different cuts for a shadow box art piece and this pack was more versatile than buying multiple single-thickness sets.
It took 19 days to arrive. The variety was great – five different thicknesses, two pieces of each. The thicker boards (5mm+) were very solid and great for frames and stands. The thinner ones were perfect for detailing. Everything was clean-cut and ready to use.
Pros:
- Variety in one affordable set
- Great structural support from thicker pieces
- Very light and easy to shape or sand
- Amazing value
Cons:
- Slight bend in one of the thinnest sheets
- Not ideal for moisture-based finishes
I paid around $7 for 10 pieces. In local stores, buying this range would cost me at least $20. This mixed pack exceeded my expectations and was exactly what I needed to avoid buying multiple separate products.
US $0.99Final Thoughts
Honestly, I went into these orders with some skepticism. I′ve bought a lot from AliExpress before, but wood products were a first. I′m pleasantly surprised by how well they all turned out – smooth finishes, consistent sizes, and durable enough for serious DIY work.
All six products were significantly cheaper than anything I could get locally in the U.S., and the quality didn′t feel like a compromise at all. I′d recommend these to any fellow hobbyist or crafter looking for good wood blanks. I′m already browsing for my next batch of supplies. AliExpress, you′ve earned another fan.
태그
AliExpress 목재 시트 리뷰, 공예품용 린든, 발사나무 AliExpress, 레이저 조각 목재 패널, 합판 공예 보드, DIY용 얇은 목재 시트, 미완성 목재 블랭크, 2025년 최고의 AliExpress 공예품 용품, 피로그래피용 저렴한 목재, 모형 제작용 목재 시트
댓글
댓글 쓰기